Monitor Audio CLG-W12 Outdoor Subwoofer

£1,500.00

The CLG-W12 is a passive subwoofer, optimised for discreet sub-surface installation.

Description

Its proprietary Monitor Audio bandpass design incorporates an internally loaded 12” C-CAM driver which sits in a waterproof rotationally-moulded polymer enclosure buried below the garden surface – only the CLG-W12’s domed output port is visible. From this little ‘chimney’ powerfully taut bass frequencies will join the clean mids and highs of the surrounding CLG140 satellites for punchy and articulate full-range garden sound.

The CLG-W12 can be powered from a single amplifier channel at 4 ohms, with its 70/100V line option recommended for cable runs over 10m (30ft) and for adding subwoofers to the system. In this line configuration, the CLG140 satellites are daisy-chained to the CLG-W12, one after the other, up to a recommended maximum of twelve per subwoofer. System expansion to larger garden spaces simply involves the addition of amplifier channels, subwoofers and satellites.

In the simplest designs, satellites are connected in a mono configuration to one amplifier channel, the other channel powering the subwoofer. The use of a stereo power amplifier with 70/100volt line capability and crossover features will allow the adjustment of levels between bass and mid-high range. Alternatively, the system can be designed to provide stereo operation by adding elements to create left/right zones.

When installed the Climate Garden System delivers a smooth, wide-open and controlled frequency response from 30Hz to 30kHz in the targeted environment: better than many home audio systems! For patio or deck applications, the CLG-W12 will install within a planter box to enhance Monitor Audio’s CL Series all-weather cabinet speakers with deep bass frequencies, giving custom installers additional design options.

Technology

Monitor Audio CLG-W12 Specifications
Frequency Response 30Hz – 100Hz
Sensitivity ([email protected]) 87dB
Impedance (nominal) 4 Ohms or 70/100 Volt line level (cable select)
Maximum S.P.L 110 dBA
Power Handling 250 W
Amplifier Requirements (RMS) 100-250W
Driver Complement 1 x 12″ C-CAM cone, long throw sub-bass driver
Crossover Recommendation (low pass) 100Hz at a minimum of 12dB/Octave (24dB/Octave optimum)
External Dimensions (H x W x D) 750 x 380 x 505.5 mm (19 1/2 x 14 15/16 x 19 7/8″)
Connection Encapsulated cable connection
Enviromental Protection Rating IP54
Weight 19.5 kg (42 lb, 14 oz)

Contact us today for your installation and product queries

Shopping cart
There are no products in the cart!
Continue shopping
0