Between 2 stud frames or where pipework or cabling reduces mounting depth, the hybrid back-box construction and proprietary full-range driver array combine to deliver consistent audio quality with exceptional installation versatility.
The hybrid back-box provides the best of all worlds for installer and customer. Combined, the three proprietary 3 mid-bass units achieve the bass output of a 61/2 driver, all from a super-stealthy flush-fitted profile.
In keeping with Monitor Audios renowned design rigour, the crossover comprises high quality film capacitors and low loss inductors – selected for signal integrity – ensuring peerless audio detail and dynamics from a speaker of its size and application. When the CSS230 is in ported mode, a fine gauze protects the acoustic system from dust ingress.
|Monitor Audio CSS230 Specifications|
|Frequency Response (-6dB)||100Hz – 30KHz sealed ‘CP’ (85Hz – 30KHz – open back)|
|Sensitivity ([email protected])||86dB|
|Power Handling (RMS)||40 Watts – Full range (60 watts with crossover set to 100Hz @ 12dB/Octave)|
|Recommended Amp Requirements||10-60w|
|Drive Unit Complement||3 x 3″ C-CAM cone bass mid drivers|
1 x 119mm (3/4″) C-CAM Gold Dome tweeter
|Crossover Recommendation – using an AVR||100Hz at a minimum of 12dB/Octave|
|Connection||Gold Plated Sprung push terminals – for bare wire connection up to 4mm (2)|
|Overall Diameter (including grille)||250mm (9 13/16″)|
|Overall Depth (including grille)||54 mm (2 1/8″)|
|Cut Out Diameter||211mm (8 1/4″)|
|Pre-Construction Bracket||CB6 (Purple)|