A new 500 watt DSP controlled amplifier utilises advanced switch-mode power conversion techniques and superior processing to increase dynamic control and deliver far greater head-room.
The W12s sealed box construction ensures that this potent unity of power and control delivers tight, fast and tuneful bass all the way down to a thunderous 22Hz in a typical room set up.
The sealed box, front-firing driver design makes for easy installation and EQ where close proximity to a room boundary may be necessary.
The W-12 also features Monitor Audios proprietary and innovative APC (Automatic Position Correction) system, which uses a microphone and test tones to identify detrimental room modes and correct frequency response for the room and position automatically. This simple and quick process will ensure perfectly optimised seismic bass quality in any room.
Ultra long throw 12 driver featuring concave dished C-CAM® cone.
Triple suspended driver for ultimate linearity, ensuring control at high power and long excursions.
Oversized black anodised 3 driver voice coil provides high power handling and low distortion.
Powerful 500 watt RMS Class-D amplifier ensures instantaneous high current delivery.
DSP processing with driver optimisation and crossover performed digitally.
Monitor Audio developed Automatic Position Correction® (APC) optimises response for room acoustics.
USB input for firmware updates.
Three pre-set EQ mode settings (Music, Movie, Impact).
12 volt trigger provides switching control from AV amp or processor.
25mm (1) MDF construction.
Heavy radial cabinet bracing.
Top mounted control panel for easy access to main features.
Selected real wood veneer or high gloss piano finishes.
Available in a choice of Black, Oak, Rose & Walnut (£1000.00) or High Gloss Black & High Gloss White (£1100.00)
Low Frequency Response: 20Hz (Typical IEC room)
Upper Frequency Limit: 40 – 120Hz Variable
Low Pass Filter Alignment: Active 4th order 24dB/Octave
Amplifier Power Output: 500W Continuous
Amplifier Classification: Class-D amplifier with Switch mode power supply (SMPSU)
Bass EQ Profiles 1: Movie, 2: Music, 3: Impact
Phase Control 0 & 81 degrees
Auto Sensing Line Level >2mV
Input Level Requirements Standby after 20 minutes if no signal sensed
Driver Compliment 1 x 12″ C-CAM® sub-woofer driver featuring triple suspension and 3″ long throw voice coil
12v Trigger Input 5 – 12v via 3.5mm mono mini-jack socket
Cabinet Dimensions: (H x W x D) (Excluding Grille & Amp) 340 x 340 x 380mm
Cabinet Dimensions: (H x W x D) (Including Grille & Amp & Feet) 370 x 340 x 410mm
Mains Input Voltage 110 – 120 Vac / 220 – 240 Vac 50/60Hz (Electronically Auto selected)
Power Consumption 400 Watts / 0.5 Watts in Standby (ErP approved)
Individual Weight:20.1Kg (44 lb 4 oz)